Commercial Floor Recoating
Commercial floor recoating in Grants Pass, OR renews worn finish on busy business floors with the Bona Traffic HD system, with no full sand-down required.
Restore the Shine Without Sanding
Hardwood Floor Recoating in Grants Pass, OR That Brings Back the Sheen
Hardwood floor recoating in Grants Pass, OR brings back a protective sheen without sanding to bare wood, using the Bona Traffic HD system. Imel and Sons Hardwood Floors offers free quotes at (541) 479-7919.
Know the Signs
Signs Your Dull Hardwood Floors Are Ready for a Recoat
A floor finish wears out long before the wood does. The clear coat on top takes the foot traffic, the grit tracked in from outside and the scrape of chair legs, and over time it thins and loses its shine. Catching that wear early is what makes a recoat possible.
- Traffic lanes that look gray or cloudy next to the shinier edges of the room
- Fine surface scratches that sit in the finish rather than in the wood
- A finish that no longer sheds water and soaks up spills instead
- Dull hardwood floors that still look flat right after a thorough cleaning
- Patches worn thin in front of the sink, the sofa or an entry door
If the boards are still sound and the wear has not reached bare wood, a recoat is usually the right call. Once the finish wears through and the wood itself turns gray or stained, the floor needs more than a new top coat.
What Hardwood Floor Recoating in Grants Pass, OR Involves
Hardwood floor recoating in Grants Pass, OR, puts a fresh layer of protective finish over the finish you already have, with no sanding down to bare wood. The existing coat is deep cleaned and prepared so the new one can bond to it.
Many people search for this service as screen and recoat hardwood floors, because the traditional method lightly scuffs the worn coat with a buffing screen before the new finish is applied. The goal is the same either way: a clean, prepared surface that a fresh coat will grip. Without that preparation, a new finish can peel or flake because it never truly bonds to what is underneath.
The stain and the wood stay untouched, so a wood floor recoat keeps the look you already love. It renews the protection and the sheen, which makes it the right fit for floors that are worn on the surface but healthy below it.
Why We Use the Bona Traffic HD System
Preparation decides whether a new finish lasts, and that is why Imel and Sons recoats with a Bona system. The process starts by lifting the contaminants, waxes and oils that build up on a floor over years of cleaning products, cooking and everyday living. Those residues are what keep a new coat from adhering, so they come off first.
The finish itself is a two-part waterborne coating, mixed with a hardener just before it goes down and made for floors that see heavy traffic. It comes in several sheens, from satin to matte, so your restored floor can have the look you prefer. The result is a floor with its protective sheen back and a fresh layer between the wood and daily wear, without the heavy dust of sanding.
Which Hardwood Floors Can Be Recoated?
Most finished hardwood can be recoated as long as the existing finish is worn but still intact. Imel and Sons regularly recoats four kinds of floors:
Hand-scraped and antique floors are often the best candidates of all, since a full sanding would remove the very surface that makes them worth keeping. If you are not sure whether your floor qualifies, owner Mike Imel will look at it and explain the pros and cons of each option before any work starts.
- Hand-scraped floors, where sanding would erase the texture that gives them character
- Site-finished floors, which were sanded and coated in place when they were installed
- Prefinished floors, which arrived from the factory with their finish already applied
- Antique floors, where keeping the original wood and its patina matters most
How It Works
Our Recoating Process From Quote to Final Walkthrough
A recoat is a shorter job than refinishing, but every stage still matters. Skipped preparation is the most common reason a new finish fails, so most of the care goes into the work that happens before the finish is applied.
Free Quote and Floor Assessment
We look at the condition of the existing finish, check for any wear that has reached bare wood, and tell you plainly whether a recoat or a deeper fix makes more sense.
Clearing and Cleaning the Room
The work area is cleared and the floor is vacuumed thoroughly, so loose grit and dust are not dragged into the new coat.
Deep Cleaning and Bonding Prep
The surface is treated to lift contaminants, waxes and oils and to prepare the old finish, so the new coat adheres to it instead of sitting on top.
Applying the New Finish
A fresh coat goes on evenly across the floor, restoring the sheen and the protective layer. We explain how long to keep traffic and furniture off before you move back in.
Final Walkthrough
We walk the finished floor with you, answer your questions and leave simple care advice to help the new finish last.
Recoat or Refinish: Which Does Your Floor Need?
The answer comes down to how deep the damage goes. A recoat fixes wear in the finish, while refinishing fixes wear in the wood. If scratches have cut into bare wood, the boards have turned gray, or you want a new stain color, the floor needs hardwood floor refinishing, which sands it to bare wood and builds it back up with stain and protective coats.
Recoating takes less time and removes no wood, so it pays to do it before wear gets that far. Regular recoats can put off a full refinish, and every sanding you avoid saves wood the floor can only give up so many times.
Some floors need a fix first. Cracked boards, deep gouges and loose spots call for hardwood floor repair before any new finish goes on, and new boards can be blended in so the recoat covers old and new wood alike.
What Affects the Price of Recoating Your Floors?
Every quote for hardwood floor recoating in Grants Pass, OR is based on the floor in front of us. Square footage matters most, since more floor means more finish and more time on the job.
- The total square footage and the number of rooms
- How much wax, oil or cleaning residue has to come off
- Stairs, landings and tight areas that are coated by hand
- The sheen and finish you choose
- Small repairs needed before the new coat goes down
Because a recoat skips the sanding stage entirely, it generally costs less than a full refinish of the same floor. The quote is free, and Imel and Sons keeps to a competitive price structure, with straightforward advice on what your floor actually needs.
Why Grants Pass Homeowners Trust Imel and Sons
Imel and Sons Hardwood Floors is a family-run hardwood flooring contractor based in Grants Pass, with more than 43 years in business. Hardwood floor recoating in Grants Pass, OR leads the hardwood flooring services the company offers.
Owner and lead craftsman Mike Imel personally runs most jobs, so the person who looks at your floor is usually the person who restores it. He explains the pros and cons of each option before work starts, including the times a recoat will not be enough. The crew also includes a second flooring contractor with more than 25 years on the job.
Mike Imel
Owner and lead craftsman
The team shows up on time, communicates clearly and stands behind the finished floor. Service is the company's bread and butter, which is why so many customers call again when the next floor needs attention.
Floor Recoating Across the Rogue Valley
Imel and Sons recoats hardwood floors from Grants Pass across Josephine County and Jackson County. Homeowners call for hardwood floor recoating in Medford, floor recoating in Ashland, and for finish work on hardwood floors in Eagle Point and hardwood floors in Merlin.
The valley's climate is part of why recoating matters here. Summers in Grants Pass are hot and dry and winters are wet, so floors go from months of strong sun and dry air to months of rain and mud tracked in at the door. A finish that is kept up handles those seasonal swings far better than one worn thin, and it protects the wood underneath, the one part of the floor a fresh coat cannot replace.
Recoating for Business and Commercial Floors
Shops, offices and other business floors take far more foot traffic than most homes, so their finish wears faster. Imel and Sons brings the same preparation-first approach to commercial hardwood.
Hardwood Floor Recoating Questions
How often should hardwood floors be recoated?
It depends on how much traffic the floor sees. A busy kitchen or entry may need a recoat every few years, while a quiet bedroom can go much longer. The best time is when the finish starts to look dull or cloudy in the traffic lanes, before the wear reaches bare wood. Waiting until the wood is exposed usually means a full refinish instead.
Can a recoat remove deep scratches from hardwood?
No. A recoat renews the finish, so it hides fine scratches that sit in the old coat, but it cannot fix scratches, dents or gouges that have cut into the wood itself. Those need sanding and sometimes board repair. When we quote the job, Mike Imel looks at the scratches and tells you honestly whether a recoat will give you the result you want.
Will recoating change the color of my floor?
No. Recoating adds a clear protective finish over the existing color, so the stain and the natural tone of the wood stay as they are. Most floors look richer afterward because a cloudy, worn finish is replaced with a clean one. A different color means sanding the floor to bare wood and staining it, which is part of refinishing.
Can you recoat a floor that was waxed or cleaned with oil soap?
Usually, yes, with the right preparation. Wax, oil soaps and polish residues are exactly what stop a new finish from sticking, which is why our process lifts contaminants, waxes and oils before any finish goes on. Floors with heavy wax buildup may need extra preparation, and a few may need sanding. We check for buildup when we look at the floor.
Is recoating hardwood floors messy?
Recoating creates far less mess than refinishing because the floor is not sanded to bare wood, so there is no heavy sanding dust to clean up. The main inconvenience is staying off the floor while the new finish dries. We explain how long to wait before walking on it and before moving furniture back, so you can plan your days around it.
Free Recoating Quotes
Bring Back the Shine on Your Hardwood Floors
A recoat done before the finish wears through protects the wood and costs less than waiting for a full refinish. For hardwood floor recoating in Grants Pass, OR, call Imel and Sons Hardwood Floors at (541) 479-7919, Monday to Friday, 8:00 AM to 5:00 PM.
Any time
Send a Request
Tell us about your floor and the team will reach out to set up a free estimate.
- A free estimate visit and a clear quote
- The pros and cons of each option, explained